Troubleshoot, maintain and train department personnel in the operation and upkeep of plant forklift, pallet jacks and personnel lifting equipment

Conduct preventive maintenance and re-build equipment as necessary

Troubleshoot and repair equipment

Insure all material handling equipment is maintained effectively and reliably to ensure proper operation as needed within the production environment in a safe manner

• Must be able to change engine oil combustion engines
• Must be able to properly grease/ hand pack a bearing
• Must be able to assist in equipment overhaul
• Must be able to change and properly tension a V-Belt(s) i.e. alternator and water pump belts
• Must be able to change pallet jack load wheels and also rebuilt rollers as required, including axles
• Must be able to complete lockout/ tag training and then demonstrate how to lockout/ tag out properly
• Must be able to comprehend equipment manuals including basic schematics/diagrams
• Must be able to demonstrate how to use a drill press properly
• Must be able to demonstrate how to use a power drill properly
• Must be able to demonstrate how to use a tap and die set. What size drill bit do you use to drill and tap a ¼-20 bolt.
• Must be able to demonstrate the ability to use a chain breaker, repair a roller chain and how to align properly
• Must be able to fill out a Hot Work Permit and show how to display it
• Must be able to light, properly adjust and make a cut using a cutting torch
• Must be able to make a basic weld on mild steel and on stainless steel
• Must be able to safety secure a piece of equipment that has been raised from ground level
• Must be able to use basic welding/cutting principles
• Must be able to use hand tools properly
• Must have proven knowledge to include theory, operation and troubleshooting of system
• Must have the ability to use basic hand tools
• Must have the knowledge and ability to work safely. Explain the proper PPE to use for a job.
• Must have the knowledge of different types of hydraulic oils and where we use them
• Must maintain a comprehensive PM program
• Must maintain proper hydraulic oil levels
• Must be able to bend, stoop, push, pull and crouch
• Must be able to lift over 50 pounds
• Must be able to move, climb and work from ladders safely
• Must be able to work on wet floors, walk and stand for prolonged periods of time
• Must pass required test
• Must be able to work overtime, weekends and/or times dictated by production requirements/needs
• Must be able to submit and pass a criminal background check

All your information will be kept confidential according to EEO guidelines.